Ender 5 MHN9H rail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for the stock Ender 5 carriage on a MHN9H rail
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounting plate for the stock Ender 5 carriage on a MHN9H rail.
Mounting the adapter plate to the carriage;
M4 x 30 Hexagon Socket Countersunk Head Screw (x2)
M4 Nyloc nut (x2)
The two top holes where the wheel-axles were are M5 holes, we use M4 bolts; the model has flanges that will properly center the part. This is a VERY tight fit but IT WILL fit. Just screw the bolts in.
The countersink on the bolts provide more centering.
The nuts should be nyloc, but you can get away with regular nuts, as long as they are tight.
Mounting the adapter plate to the bearing block;
M3 x 12 Hexagon Socket Countersunk Head Screw (x4)
ORM3 x 10 Hexagon Socket Head Cap Screw (x4)
Do NOT use an M14 countersunk; it won't fit in the holes of the block (too deep), ask me how I know (and this is how I came up with the drop-in replacement you see in the photos)
( Countersunk bolts are measured end-to-end, while normal machine screws only measure the thread part, that's why the countersunk bolts are longer in name, while in fact, they are the same length where it counts )