GRIGRI modification
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is made to be added onto the grigri, it allows you to hold the device upside down, for LRS
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
!Lead Rope Solo climbing is inherently dangerous, try at your own risk!
this add on allows for a chest harness to hold the device upside down, and allow autofeeding, it doubles as a loop to prevent dropping the device. Unlike other models, the orientation of the loop is the same as the carabiner hole in the GRIGRI. you must add on your own cord, 2mm is ideal, use a double fischerman, next to "S.M." the hole is made bigger, allowing you to cleanly glue the knot in there.
I printed in PLA, 100% infill, but i imagine other non flexible filaments will work, printing it long way up, makes it strongest