1 / 6
Deburr/Deflash/Bevel Tool - 1mm 45deg Chamfer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A basic hand tool to remove brims or slight elephant's foot from a printed part. Cuts a 1mm 45deg chamfer.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Revision Log:
2026-09-07 -- Initial Release
2026-09-13 -- Added a larger slot for waste material to be ejected.
Hardware Needed:
2 x M3x6 SHCS or BHCS
2 x M3 Flat Washers
1 x Standard Utility Knife Blade
Print Settings:
Material Used: Inland (Micro Center) PLA+
Layer height: 0.2mm
Infill percentage: 10%
Infill type: gyroid
Wall count: 3
Solid top/bottom layers: 4
Supports: None