1 / 7
Replacement for Celestron Large Base for StarSense / Finderscope 51710-3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wasn't able to purchase Celestron's part number 51710-3 for my 8" Evolution SCT. I subsequently made my own. Perfect!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
I wasn't able to purchase Celestron's part number 51710-3 for my 8" Evolution SCT. I subsequently made my own and the alignments produced were perfect. Calibration data are attached and it uses the same screws as the red dot sight. May or may not fit 6/9.25" SCTs.
Printed in PCTG with 100% infill and 0.6mm nozzle. Solid as a rock.
Good luck!