Tapo TC82 camera shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera shield for TPLink Tapo TC82 camera with back and bottom mount points and speaker aperture.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
TPLink advertise their outdoor cameras as IP65 but my experience shows that most are not as they leak through the connector ports, despite fitting their bungs.
This camera shield aims to resolve this issue by blocking vertical rain ingress to the charger port whether the camera is mounted from the back or underside of the camera, but is split to allow easier mounting, cable access and removal.
You should still fit the bung they provide to the USB-C cable as secondary water ingress prevention and route the cable downwards inside the fitted shield to prevent water tracking back up the cable into the connector.
I printed my models using ASA CF filament with 100% infill.