VESA 200 x 100 adaptor for Dell Monitor stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a stand for my TV, which has a 200 x 100 VESA mount.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 79
- Makes
- 0
- Views
- 1,666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I wanted a stand for my TV, which has a 200 x 100 VESA mount. I trawled the internet and couldn't find one that I liked so bought a surplus Dell stand and set about making an adaptor.
The adaptor fits straight on to the Dell stand via 4 x countersunk M4 x 10mm bolts. I bought a stand suitable for a 22in monitor and its counter-weighted nicely (there's a spring in the arm to allow easy movement up and down).
The tolerances on the adaptor are zero, which means that if you print it out at 0.35mm like I did, you'll need to slowly run a 4mm drill bit through the holes and use a countersinking bit to get the bolts to sit flush.
Print instructions
Category: Computer Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: Doesn't Matter
Supports: No
Resolution: 0.35mm
Infill: 20%
Notes:
Printed on a Prusa i3 Mk2 using Slic3r standard settings and a thin layer of glue on the bed.
It just about fits on a Mk42 heated bed. Just.
How I Designed This
Designed on FreeCAD 0.16
I'm still learning FreeCAD, so this was a practial exercise for me to try out my new-learned skills. I originally designed it as a 4mm 'H' section which was nothing like stiff enough and it just didn't look good. I took measurements from the stand that I was adapting, then used simple primary shapes to come up with the design.