1 / 2
Prusawire Anthead TZ V6 hotend mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a hotend mount using the TZ V6 nozzle for ANTHEAD when doing a Prusawire. I lowered the nozzle about 2.84mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Hello,
So I was in the proces of transforming my good old Prusa MK3S+ to a Prusawire using the Anthead toolhead. I downloaded the files for the hotend mount on the github, printed them and I noticed that my nozzle did not touch the bed, but my fan duct did instead... So I modified the part so that the nozzle was lowered about 2.84 mm.
See the pictures before and after :)
The same screw sizes can be used as provided in the nozzle kit, I compensated the extra width with deeper holes.
Good printing!!!