XOL Monolith Carto Carriage for UHF Hotends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix XOL Monilith Carriage with Carto and Square Nuts
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 10
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hi! I'm sharing a remix of the XOL Monolith Carriage here.
I really liked how the belt attachment is implemented in the original model. However, after printing the model, I noticed that I couldn't use the X-axis endstop without an additional printed adapter on the XY joint. Therefore, I moved the endstop directly onto the carriage, shifting it outward closer to the joint.
Additionally, I wanted to use the Cartographer probe without any printed adapters for it. So, I modified the model by extending the carriage to accommodate the Cartographer in my variation of the printed toolhead.
The ability to remove the pins from the bottom of the carriage is preserved, and the channel to the pin is located in front of the Cartographer.
I also updated the model to use M3 square nuts everywhere.
Supports for the top A4T mount have been removed; tree supports from the build plate are used during printing.
16.09.2026. Remove .stl. Update step model.