KTM „Ready to Race“ Wandmodell / Wall Art Logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KTM „Ready to Race“ Wandlogo mit Pfeilen + Schriftzug. Large KTM "Ready to Race" wall art logo with arrows + branding
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
Das Wandmodell besteht aus den einzelnen Buchstaben für den Schriftzug „READY TO RACE“, den charakteristischen Doppel-Pfeilen sowie dem KTM-Logo.
Besonderheit beim Druck (Perfekte Sichtfläche):
Alle Buchstaben, Pfeile und das Logo liegen als einzelne STL-Dateien vor. Die asymmetrischen Teile sind in den Druckdateien bereits gespiegelt angelegt.
Warum gespiegelt? Dadurch wird die Vorderseite der Buchstaben direkt flach auf das Druckbett gedruckt. Die Textur deiner Druckplatte (z. B. strukturiertes PEI, Carbon-Muster oder glatte Folie) wird so zur makellosen Sichtseite – ganz ohne sichtbare Schichtlinien oder Top-Layer-Infill-Artefakte!
Material:
Material nach freier Wahl: Da das Modell im Innenbereich an der Wand hängt, eignet sich Standard-PLA hervorragend (große Farbauswahl in Schwarz und KTM-Orange). Natürlich funktionieren auch PETG, ABS oder ASA problemlos.
Empfohlene Druckeinstellungen:
Größenanpassung: Die Modelle können im Slicer einfach prozentual skaliert werden, um sie perfekt an die Größe deines Druckbetts oder den verfügbaren Platz an der Wand anzupassen.
Druckbett-Oberfläche: Strukturiertes PEI-Blech für eine matte, edle Pulverbeschichtungs-Optik oder glattes Sheet für Glanz.
Perimeter/Wände: 2 reichen völlig
Infill: 15% (z. B. Grid oder Gyroid)
Layerhöhe: 0.2 mm (oder 0.28 mm für schnellere Druckzeiten)
Erste Schicht: Achte auf eine gut kalibrierte erste Schicht, da diese die spätere Sichtfläche bildet.
Größe: An eigene Druckbettgröße anpassen
Montage (Magnet-Befestigung):
Ich habe das Wandmodell unsichtbar mit Magneten montiert:
An die Wand werden Magnete befestigt (z. B. Neodym-Magnete gedübelt oder geklebt).
Auf die Rückseite der gedruckten Buchstaben werden dünne metallische Gegenflächen / Metallplättchen geklebt.
Wichtig / Tipp zur Ausrichtung: Am besten befestigt man 3 Magnetpunkte pro Buchstabe (Dreipunktauflage). Dadurch liegt der Buchstabe absolut plan an der Wand an, kippelt nicht und verdreht sich nicht.
So lässt sich das Modell bei Bedarf jederzeit ganz einfach abnehmen, neu ausrichten oder reinigen. (Alternativ kann natürlich auch handelsübliches doppelseitiges Montageband oder Powerstrips verwendet werden).
This wall art features the complete "READY TO RACE" lettering, the signature KTM arrows, and the KTM logo.
Printing Feature (Flawless Front Finish):
All letters, arrows, and the logo are provided as individual STL files. Asymmetric parts are pre-mirrored in the files.
Why mirrored? By printing them face-down on the build plate, the texture of your print bed (e.g., textured PEI, satin, or smooth) becomes the visible front surface. This eliminates visible top layer infill lines and gives a clean, professional finish right off the printer!
Material:
Material of your choice: Since this is indoor decorative wall art, standard PLA works perfectly (great color matching for deep black and KTM orange). PETG, ABS, or ASA can also be used.
Recommended Print Settings & Scaling:
Scaling: You can easily scale the models uniformly in your slicer to fit your specific build plate size or available wall space. (Tip: Make sure to apply the exact same scale percentage to all parts so everything matches).
Print Sheet: Textured PEI sheet recommended for a matte powder-coated look, or a smooth sheet for a glossy finish.
Perimeters/Walls: 3–4
Infill: 15–20% (Grid or Gyroid recommended)
Layer height: 0.2 mm (or 0.28 mm for faster printing)
First Layer: Make sure your first layer is well-calibrated, as it will be your final visible face.
Mounting (Magnetic Wall Mount):
I mounted the letters flush to the wall using a magnetic setup:
Fix small magnets (e.g., countersunk neodymium magnets) to the wall.
Glue thin metal discs / strike plates onto the back of the 3D-printed parts.
Tip for flat alignment: Use 3 magnetic points per letter (three-point contact). This ensures the letters sit perfectly flat against the wall without wobbling or rotating.
This setup makes alignment easy and allows you to remove or clean the parts at any time.
(Standard double-sided mounting tape or adhesive strips also work great).