1 / 5
Element coins
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
You can print coins with or without multi material. Multi material models are marked "MM".
layer height : 0,20 mm
nozzle diameter : 0,40 or less
Instructions without multi material:
1. slice and print the part marked xx_x.1 (look at the photo)
2. leave the model on the bed (remove the skirt and extrusion line)
3. replace the filament
4. slice and print the part marked xx_x.2 at the same coordinates (look at the photo)
5. enjoy