Hybrid Voronoi Christmas Tree - Deathstar Issue
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Even Lord Vader liked to have a bit of festive fun whilst scouring the universe for Rebel traitors and planets to…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 45
- Makes
- 0
- Views
- 717
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Even Lord Vader liked to have a bit of festive fun whilst scouring the universe for Rebel traitors and planets to destroy. Here's what his tree in his office might have looked like, with a couple of strormtroopers (see: https://www.thingiverse.com/thing:1207145) keeping guard, maybe even singing some Sith-approved Carols.
Clearly, the only decoration that any Christmas tree on the Deathstar will need is the Imperial Crest and these feature on the star and the base. Unless the force is particularly strong in you, no further ornaments are required.
This is remixed from: https://www.thingiverse.com/thing:2680747 You'll find the source files there.
Print instructions
Category: Toys & Games Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.2
Infill: 10%
Notes:
The tree and black aspects of the logo and base is printed in black Verbatim ABS, the white in white Flashforge PLA. There's no reason for the different materials, it's just what I have.
For using a 3mm shaft, scale the base parts at 100% and the logo parts at 75%. For a 4mm shaft, scale the base parts at 133% and the logo at 100%.
It should all snap together, but go careful! If it's a bit tight, try scaling back a couple of % and reprinting.
Post-Printing
The shaft will be a bit sloppy in the base so you'll need to fill the hole with some adhesive. Also, the upper shaft should be about 10mm for a 4mm model.
How I Designed This
Designed with FreeCAD 0.16