QIDI MAX 4 POLAR COOLER DUCT/DIVERTER
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Qidi max 4 polar cooler diverter, adds cool air to part cooling fan
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I received the polar cooler free with my max 4, but as I generally only print engineering materials it was no use to me and was just sitting idle. So I decided to try and put it to some use by diverting it into the part cooling fan intake. This will help reducing temp of air used by part cooling. Can be attached by using temp resistant double sided tape (link attached for tape I used), or just glued on with CA glue. It is designed so rear cover can still be removed.
Double sided tape Amazon (add tape as shown in picture)
https://www.amazon.co.uk/dp/B0DMWBP8P6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
Printed ABS CF, no supports required just check bridging is not going lengthways when sliced
I have remixed this model, duct is now part of rear toolhead cover. This model is still valid if you don't want to remove cover.