Screw Bracket for 1" Peg Board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for 1" pegboards which allows for items with screw slots for mounting to be hung on the pegboard.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 1
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bracket for standard 1" pegboards which allows for items with screw slots, such as many tool battery chargers, for mounting to be hung on the pegboard. The "screw head" is roughly the same dimensions as a #8 flat-head screw. If your item needs a different size, you may need to tweak the model, or feel free to reach out and I can add a version with different dimensions.
Each bracket only has one "screw head", so you will likely need to print at least two for use, and the item that you're hanging needs to have the screw slots that align with your pegboard spacing.
Print Settings
I printed this in PETG, but PLA should also be fine. Depending on how heavy the things are that the pegs are going to hold, you may want to print with stronger settings. But, for most uses, the below settings are likely sufficient.
3 walls
20% gyroid infill
Support on
Files
Both a 3MF file for printing and the FreeCAD design file are included, in case the dimensions don't quite work for you.