Canon Power Shot G9X gyro leveling system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An auto leveling Camera attachment.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
To the Makers, Printers, Photographers, Videographers and Engineers...
INTRODUCING THE ONE AND ONLY CAMERA GYRO!!!!!!
This camera gyro is the only one you can find on Printables! This model was made by a young Engineer (Me who's a 13 year old!). I spent so much time, a week and a half, into this model, prototyping, designing and of course printing. I wanted to take some time and share the work that I have done to make this model.
It all started when I saw this competition,

I new that I had to enter in this competition, but I didn't know what I could design for this challenge. So I took a problem probably all of us have faced in photography and videography, wobbly cameras and unstable videos.
For some older cameras their built in video stabilization is not to great. So I took one of the greatest leveling systems of all, the Gyro. This would offer the perfect leveling system that needs minimal hardware and can print on most printers.
I started on designing a printable gyro just to see if this idea is a working model.

This was a good start but was a bit to small.
I put a pause on the gyro and started working on the Camera frame. I needed a counter weight on the bottom but it turned out pretty bad or OK.

I realized that making a counter weight was not going to work and the current gyro fell apart to easily, so I decided to take the heavy camera and use that as the counter weight.


This design worked WAY BETTER!
Even though it needs a press in thread and nut it works 10 times better than the previous designs!
This is the one i chose to give to all of you FOR FREE! This design may seem bland right now but trust me, I have a whole lot more with this model, Lights, Microphones and SOOO much more! God Bless and I hope this model comes to aid for you!
Here are the CAD pics I took to prove that this isn't AI



This is the kit I got off amazon for the threads and screws, https://www.amazon.com/Preciva-Threaded-Inserts-Insert-Tip-Soldering/dp/B0GS5V115S/ref=sr_1_8?crid=3SE566ZVMBNXJ&dib=eyJ2IjoiMSJ9.ROgYxr4UZsnnXQHF5uZgznzVapux7ggDaagVTDymoXOLT7286qHLAK2eCnb8aVyc68ajCW0LsBIkURQB78P2tM0Sg3Gb5-lH5HUrgaIIsFzB9Eat-QQVnlrmgP4ZyTNZFzsRo3w4JMtyZymIZ0iWpbN3hjSpr0pK-E5WqCz95skTQ1fbSTQq_akz7qldQVDkQdtAAV3N-f3LUOCyj5UkpdLrQksaEjvh8tJnfjuHHvQ.vYXXRCGCYvseGhjWf7GeyDM0GhgDmC_2uUEo9pHG9QI&dib_tag=se&keywords=thread%2Binsert%2Biron&qid=1789097471&sprefix=%2Caps%2C136&sr=8-8&th=1
The photos that are green or orange were tests and the last four black ones where tests as well.