1 / 1
KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve — image 1

KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.70 – €0.85 net (excluding VAT)

For file: TPI Oil Fill Sleeve_0.2mm_PETG_MK3S_56m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.78 excluding VAT (range midpoint).

Weight reported by the author
7 g
Print time reported by the author
55.8 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap.

Rating
5 / 5
Likes
44
Downloads
910
Makes
2
Views
3,837
Reviews
2

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills.  Print simply slides over the top of the cap once installed.  Minor scaling may be required to adjust fit (+/- .5 degree likely).  For improved sealing to the frame, try using an old grip donut slipped out over the fill neck.

Tags