Zara Home – Large Kitchen Bin Replacement Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement 3D-printable housing for the lid mechanism of the Zara Home Large Kitchen Bin.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Open Community License v1.1
Features:
Reinforced lower mounting points aligned with the original tab locations
Internal M3 screw and captive hex-nut pockets
Restored and reinforced broken upper mounting area
38 mm internal clearance
Rounded corners and tapered back profile
Reinforced 5 mm support brackets
Separate 4.5 mm × 63.2 mm dowel pin included
Recommended hardware:
2 × M3 × 6 mm screws
2 × standard M3 hex nuts
Wide metal washers for the 1 mm sheet-metal slots
Print recommendations:
PETG or PLA
0.16–0.20 mm layer height
5–6 wall lines
40–60% infill
Print the dowel horizontally for better bending strength