Parametric phoneholder for the VW Up / Skoda Citigo / SEAT Mii Navigon arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snap-fit phone holder for the VW/Skoda/Seat Navigon GPS arm. Parametric Python — adapt to any phone.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v2.0
# Phone Holder for the VW Navigon GPS Arm (1S0 035 936 A)
Remember the flexible dash-mounted GPS arm that came with the Navigon infotainment option in the VW Up, Škoda Citigo and Seat Mii? This holder clicks straight onto it — same rock-in, same latch, same release button — and turns it into a proper phone mount. No adapters, no glue, no damage to the car.
The mounting interface was reverse-engineered from the original arm head and the back of a Navigon 7000T with calipers and sixteen printed test fits: rock the top tab in, press down, and the arm's spring catch clicks the holder home. Press the button on the arm to release, exactly like the original unit. The socket includes a light preload fit, so the holder sits snug with (almost) OEM-level play.
The cradle is designed for a bare phone (no case), dimensioned from Apple's official accessory drawings. Fourteen models are built in as presets — the full iPhone 15, 16, and 17 families plus the iPhone Air — and generating any of them is a one-command build. The default STL here is the iPhone 15 Pro. Other phones can be added by editing one clearly-marked block in the script, provided you have the manufacturer's dimensions (no promises about models whose drawings aren't published).
Models with the Camera Control button (iPhone 16/17 families, Air) automatically get a relief notch in the right rail so the button stays usable. Note the Camera Control notch geometry is derived but not yet print-verified — if you print one of these variants, please confirm the notch lines up and report back.
## Features
- Clicks onto the arm using its original latch — removable with the original release button
- Portrait slide-in cradle; phone drops in from the top, sits on a bottom shelf
- All buttons usable: rails end below the lock and volume buttons
- Camera bump floats free — the backplate ends below it
- Framed bottom window clears the USB-C port, cable overmold, speaker and mics, so you can charge while mounted
- Socket is offset 20 mm so the holder rides high and doesn't block the climate controls (tune socket_cy for your dash)
- Three TPU back pads take up clearance and stop rattle — printed in three thicknesses so you can tune the fit
- Fully parametric ([build123d](https://build123d.readthedocs.io)): phone dimensions, clearances and the socket position are all named parameters
## Printed parts
1. *cradle_V13_{PHONE}.step** — the holder (~48 cm³). One piece, includes the socket.
2. *tpu_pads_9x_v3.step** — nine TPU discs, three each of 1.6 / 1.7 / 1.8 mm (marked with 1/2/3 dots). You use three; the ladder lets you pick your preferred snugness.
3. *socket_coupon_C16.step** (optional but recommended) — a small test puck of just the click interface. Print this first and test it on your arm before committing to the full holder.
## Print instructions
Cradle — PLA+ works if your car doesn't bake in the sun; use PETG/ABS/ASA/PC-blend for hot climates (PLA will soften on a summer dash). 0.2 mm layers, 3 perimeters, 15 % infill.
*Orientation:* standing upright on its bottom edge with organic/tree supports. Printed this way the socket's undercuts become sideways pockets and print cleanly, the phone bay needs nothing, and the tree supports mostly just stabilise the tall part — the click fit on the arm came out spot-on.
TPU pads — TPU 95A, 0.1 mm layers (important: 1.7 mm isn't a whole number of 0.2 layers — the middle row would silently round away). 100 % infill. The discs drop loosely into the recesses and are held captive once the phone is in; add a dot of glue for permanence. Note the disc diameter in the script is compensated for a TPU profile running a 1.12 extrusion multiplier — if your profile runs neutral flow, bump DIA in pads.py up by ~0.25.
Socket coupon — same material and orientation as the cradle. It should rock in at the top, click at the bottom, and release with the arm's button, with only slight play. If it binds or flops, adjust and reprint the coupon (20 minutes) rather than the full holder.
## Assembly
Drop the three TPU discs into the backplate recesses (start with the 2-dot / 1.7 mm set), slide the phone in, and adjust disc thickness until the phone is held gently against the front lips with no rattle. Then glue the winning discs in with a small dot of CA or use thin double-sided tape. Click onto the arm. Done.
## Adapting to your phone
Fourteen iPhones are already in the PHONES registry — build yours with e.g. python3 cradle.py iphone-16-pro. For anything else, add an entry with: width, length, thickness, how far the camera bump reaches down from the top edge, and the button zones (measured from the top edge, the same way manufacturer accessory drawings dimension them — Apple's are at developer.apple.com/accessories). The rail height and backplate height derive automatically so the buttons stay reachable and the camera stays clear. Do not edit vw_socket.py — that's the click interface to the arm, and it mates with the car, not the phone.
## Print tips
- Fit too tight or loose on your arm? The socket's key parameters are documented in vw_socket.py — clamp preload bowl_diaarc_r, one circle), slot widths, and lip thickness. Move one at a time, retest with the coupon.
- Phone sliding stiffly? The bare fit is intentionally loose (the TPU pads do the holding) — check for elephant's foot on the rail lips before changing clearances.
- The included dimensions produced a click-fit within a whisker of the original Navigon unit's factory fit on my arm. Printers vary — the coupon is your friend.