Prusa MK3S Reverse Bowden and filament cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.61 – €0.74 net (excluding VAT)
For file: Top Holder with 9 mm hole - only / top_z_bowden_holder_9_mm_03mm_petg_mk3s_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 35.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder.
- Rating
- 4 / 5
- Likes
- 70
- Downloads
- 663
- Makes
- 7
- Views
- 4,515
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Simplistic reverse Bowden with an integrated cleaner (sponge) space on top of the extruder.
Print instructions
Category: 3D Printer Parts Print Settings
Printer: Prusa MK3S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2
Infill: 15%
Filament: Prusa PLA Silver
Notes:
Really simplistic reverse Bowden, but I wanted to include a filament cleaner at the same time and stay as close as possible to stock. So this is a little contribution.
I personally kept a length of PTFE tube on the spool to smoothen even more the filament pull. The second Bowden coupler on the top Z part is totally optional.
You only need to print either the 6mm or 9mm depending on your Bowden adapter. (PC4-M6 or PC4-M10 I think).
No catch, prints right away on my Prusa MK3S, no support needed. Just be careful to put the smaller opening of the cap on the bed and not on top to avoid troubles.
Parts: PTFE tube, 2 / 3 Bowden couplers (PC4-M6 or M10), roughly 90 min print.
PS: The included Gcode is for PC4-M10 couplers.
Assembly is quite easy: put a small piece of sponge in the cap, go through it with filament, load it, screw the cap and you're all set.
Made with Fusion 360.