xTool P3 Air duct low profile adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile air duct adatper for xTool P3 ventilation
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
When you need to save space behind the P3 and the wall, remove original hose adapter from xTool hose and insert this plug inside the hose. 50-60% smaller allowing you to bend the tube closer to the back side of machine.
Print instructions
PLA
0.6 nozzle, 0.2 layer
3-4 perimeter to 100% fill the inside of the model
concentric top and bottom surface
Mounting instructions
remove original xTool hose ending
trim the brim at the bottom of the model
model has slight taper on internal diameter and the thread
side of the model with removed brim faces the end of the hose
heat the hose with heat gun around 150°C (it is very tight fit)
screw the adapter to the hose, reheat as needed
trim the excess hose