Ortur Laser Master 2 Adjustable Z with NEJE Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can mount stock Ortur laser or mount a NEJE mount directly. Has a full 50mm of travel Has mounting hole access so it…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 146
- Makes
- 0
- Views
- 1,087
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Can mount stock Ortur laser or mount a NEJE mount directly.
Has a full 50mm of travel
Has mounting hole access so it can be pe-assembled before mounting laser.
You will save 10-15mm of Y-travel over the Ortur Z-Lift assembly add-on.
If you mount a NEJE laser module you will need to lengthen the wires to the Y-Axis limit
switch, and adjust accordingly.
There is an Optional NEJE Controller Board Enclosure that can be mouted to the base.
A drop of CA glue was used on the Knurled Thumb Nut and retainer so they would spin freely (after assembly).
I printed on a Prusa MK3S using .15mm Quality Settings
Perimeteres: 3
Infill: 30%
Infill Pattern: Grid
Top & Bottom Solid Layers: 4
Parts:
100mm M6 Threaded Rods https://www.amazon.com/gp/product/B01LY0L7Q7/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
M6 Barrel Nuts https://www.amazon.com/gp/product/B00KRY0AS6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
30%
Filament:
eSun PLA+
Notes:
Alternately you could use something like this;
M6 Furniture Bolt Set
[https://www.amazon.com/dp/B01MS80URX?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details](https://www.amazon.com/dp/B01MS80URX?psc=1&ref=ppx_yo2_dt_b_product_details&tag=thingiverse09-20)
You could also use an M6 Knurl Thumb Screw instead of the printed part https://www.amazon.com/gp/product/B07LFRWD7B/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Category: 3D Printer Accessories