Moonbean — Sleepy Cat & Crescent Moon Sculpture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sleepy little cat nestled in a crescent moon. One-piece, 80 mm desk sculpture with a flat base.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Moonbean: a sleepy little cat curled into a crescent moon, with closed eyes, a tiny nose, tucked paws and a wraparound tail. A small piece of calm for your desk or shelf.
Original procedural sculpture created with AI assistance. The downloadable STL is a single connected mesh with a flat base, approximately 68 × 46 × 80 mm. No assembly is required.
PRINT STATUS
This is an untested digital design. The images are renders of the actual model, not photographs of a physical print. Mesh checks confirm a closed surface and one connected component; a physical test print is still needed.
SUGGESTED STARTING SETTINGS
Print upright on the flat base. Start with PLA, a 0.4 mm nozzle, 0.16–0.20 mm layers, 3 perimeters and 10–15% infill. Inspect your slicer preview and add supports beneath the crescent overhang and other unsupported areas as needed. These settings have not been physically validated.
Try a single pastel filament or paint the moon and cat after printing. If you print Moonbean, share a make and your settings to help improve the model.