1 / 2
Cherry MX Keycap - Concave
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple MX keycap with a concave texture.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small modification to the original, I wanted a concave texture on it. The texture has a depth of 1 mm.
Print Settings:
Can be printed upright (stem down) or upside down (texture down). I printed it upright.
Layer height: 0.2 mm or lower
Brim: If needed
Supports: No
Infill: Any
Additional Notes:
If the keycap is too tight or too loose, adjust XY Compensation/Horizontal Expansion by -/+ 0.1 respectively.
Happy printing!
-X3