Moroccan Oasis Echo Pop Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ornate Echo Pop lantern with modular 3-foot pedestal, revised speaker seat, cable routing and fit-test tray.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
An ornate Moroccan lantern-inspired indoor stand adapted for Amazon Echo Pop, with pierced panels, an onion-dome roof and separate finial. The modular pedestal raises the lantern support surface 914.4 mm (36 in).
ECHO POP REVISION
Designed around a nominal 99 × 83 × 91 mm speaker envelope. The body provides 103 × 95 mm rectangular clearance, a 20 mm central cable passage, recessed channel and rear exit. The original decorative chamber height, roof and pedestal geometry are retained.
PRINT THE FIT TRAY FIRST
Check your actual Pop, rubber foot and power plug in PRINT_FIRST_Pop_Clearance_Tray.stl before printing the full body. Verify the connector passes through the 20 mm opening. This is a loose clearance tray, not a contour-fit socket. Do not scale individual parts.
FILES AND QUANTITIES
8 STL files and assembly README. Print one body, domed roof, finial, base reservoir, base cap and top adapter; print four copies of the column. The small tray is for checking fit. Existing owners of the original stand and roof need only the revised body after checking fit.
PRINTING AND ASSEMBLY
PETG; 0.20–0.28 mm layers; 4 walls; 5 top/bottom layers; 20–25% infill. Units are mm. Inspect supports for decorative overhangs. Roof is approximately 215.9 mm wide and 233 mm tall; check your build volume and brim clearance. Route cable through the pedestal and body floor, then toward the rear (+Y). Face speaker toward -Y. Remove roof to access top buttons. Ballast base with dry sand and secure stand joints. Test-fit the separate roof finial before securing.
TEST STATUS
Meshes checked digitally for closed surfaces and consistent winding; rectangular device envelope and straight top insertion path checked for no body collision. The owner confirmed physical testing of this Echo Pop revision on September 12, 2026 and reported that all is well. Check sound and microphone pickup in place. Gallery images are 3D model renders and a digital clearance diagram, not photographs of physical prints. Use indoors in a dry location; the printed roof does not weatherproof the Echo Pop.
ATTRIBUTION
Adapted from our Moroccan Oasis Echo Dot 3 stand: https://www.printables.com/model/1836620
Underlying source: Nrmilanovic, “Amazon Echo Dot 3rd Gen Rain Cover”: https://www.thingiverse.com/thing:5395708
Creative Commons Attribution 4.0: https://creativecommons.org/licenses/by/4.0/
Changes include the decorative enclosure, roof and finial, modular pedestal and Echo Pop cavity and cable routing. AI-assisted creation. Amazon and Echo belong to their respective owner; no affiliation or endorsement.