Prusa MMU2 Color Torture Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this model to test color changes on the Prusa MMU 2.0.
- Rating
- 4.667 / 5
- Likes
- 9
- Downloads
- 357
- Makes
- 4
- Views
- 1,834
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Use this model to test color changes on the Prusa MMU 2.0.
While this model is only 25mm tall, it takes 500 color changes to successfully print it.
If your print doesn't make it to completion you can calculate the number of color changes completed by this formula : # Color Changes = Z height from the printer display / layer height x Number of colors.
For the full model: (25mm/ .2) x 4 = 125 x 4 = 500
The model takes about 12.6 hours to print and uses 4g of filament.
The purge tower uses 98.8 grams of filament.
If you decide to try this test, please submit a make with a picture and the number of layers that you were able to print with out jams or skipped layers.
Print instructions
Category: 3D Printing Tests Print Settings
Printer: Original Prusa i3 MK3 / Multimaterial 2.0
Rafts: No
Supports: No
Resolution: .2 mm layers
Infill: 20%
Filament: Prusa PLA White/Silver/Black/Red/Blue