BTT EBB36 GEN 2 HextrudORT Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a BTT EBB GEN 2 mount for the HextrudORT Extruder built on the Mellow Zero G CNC toolhead.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a BTT EBB GEN 2 mount for the HextrudORT Extruder built on the Mellow Zero G CNC toolhead. I wanted a solid design with more points of contact than the normal 2 standoffs to eliminate moment.
The BTT EBB36 GEN2 connector was also a tricky one to add cable relief to, so I made it a connector which is clamped in place and solidly fixed using the cable/CPAP metal stand up as another point of contact. Between the two machine screw clamps and the connector clamp the EBB is held very rigidly.
Lastly I added a endstop mount on the left side.
Disclaimer, I am not a CAD designer, the model is a little rough. Some dimensions were done by hand, the cable clamp in particular was tricky to model, the fit is very tight but the flexible rubber of the connector allows for the connector to fit. .step files add for remix culture.