Postcard / Autograph card / Photo stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple stand for a postcard, autograph card or even a photo
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I needed an decent stand for my autograph cards, so I designed one. After I had designed and printed it, I realized that it could, of course, also be used for postcards or photos.
There are two versions, one decent version, with only ~1mm deep groove and one with an ~5mm deep groove for more heavier and bigger cards.
The groove is 1mm wide on both versions and its 75° angeled.
Print Settings
Material: PETG preferred, PLA not tested, but will work
Layer Height: 0,20mm / 0,4mm nozzle
Infill: 10-15%
Nu supports needed.
If you found this useful please leave a make and/or a like or support me on Ko-Fi -Thank You!