Heras Fence Post Lamp Mount (T-shape, plug-in, 42mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn any standard 42mm Heras/construction fence post into a lamp stand.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Heras Fence Post Lamp Mount (T-shape, plug-in, 42mm)
Turn any standard 42mm Heras/construction fence post into a lamp stand. This adapter plugs into the hollow top end of the tube and gives you a flat, T-shaped mounting plate above the fence line — perfect for event lighting, marker lights, or safety beacons on temporary fencing at night events.
Features
Plug-in mount: inserts directly into the open top of a 42mm OD Heras fence tube (assumes ~2mm wall thickness → ~38mm bore). A flange rests on the cut rim so the load is carried by the tube wall, not just friction.
Reinforced T-arm: 25mm stem with triangular gussets under the top plate to resist wind load and leverage from the lamp.
Three mounting options on one plate — pick whatever fits your lamp:
2× Ø6.5mm bolt holes (M6)
2× Ø4.2mm pilot holes (M4 self-tapping screws, direct into a lamp housing)
2× stadium slots (cable ties / zip ties, 4.8–9mm width)
Print settings
Material: PETG recommended for outdoor/UV exposure (ASA even better, PLA not recommended outdoors)
Layer height: 0.2mm is fine
Infill: 30–40% for the plug/flange/stem (load-bearing); 15–20% is enough for the top plate unless mounting something heavy
Supports: likely needed under the gussets and the stem-to-plate transition; the round plug and flange print fine without support
Overall height: ~239mm — check your build volume before slicing
Before you print — check this first
This model assumes a fence tube wall thickness of 2.0mm (giving a ~38mm bore for the 42mm OD tube), which is typical but varies by manufacturer. Measure the actual inner diameter of your tube with calipers before printing.
Hardware needed (not included)
Depending on which mounting option you use: 2× M6 bolts (+ nuts), or 2× M4 self-tapping screws, or cable ties. Regular stainless hardware is recommended — small 3D-printed threads aren't reliable for this.
Files
STL, ready to slice
