Cupholder for Peak-Care Ellipse Super Lite mobility rolling walker/rollator/wheelie-walker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removable cupholder that clamps on at seat-level so there's your seat, and a beverage when you reach your destination
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Adding the missing piece to this useful mobility kit. At your destination not only will you have a seat, but also a place for your cup, mug, or can, or bottle. This design will likely evolve with feedback and use.

(image above from front cover of user manual) This is designed for the Peak-Care Ellipse Super Lite, but a customisation of the mount part should make it customisable to suit others.
This cupholder prints in 3 parts:
the mount is a hinged clamp that wraps around the upright, sitting beside the seat over the seat mount out of the way. This is easy to remove for folding the chair up for transport or storage. A small insert of foam etc can firm up the fit if there's slack.
the bolt screws in to hold the mount shut
the holder is for the cargo and is slotted for a cup/mug with a handle. It has a dovetail join to fit into the mount - optionally add a drop of glue to keep them together more permanently
Print with 0.2mm layers, especially the mount and bolt for accuracy of the printed thread. There are no supports needed if the mount and bolt are printed upside down, and the holder right way up. I've included a PrusaSlicer project 3mf with the settings I used.
The hinge prints in place so you'll need to crack it that first time to free it up.
I printed this yellow one in eSun PETG+HS.
Let me know if you use it, and any suggestions for improvement!