aTinyShellScript AWD Y Endstop Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Y Endstop mount for ATSS
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Voron Trident/2.4 aTinyShellScript AWD/2WD Y Endstopmount
Model origination:
I have aTinyShellScript 2WD plates on my Voron 2.4 350 and did not find a suitable Y endstop mount. I used another from a firend but I lost about 4mm in Y travel which was the exact amount required for my nozzle brush to function.
Feel free to remix this model, I am including the step file for easier editing, all I ask is that you credit me for my design and the original designed of ATSS when remixed for your use case.
Print Requirements:
Print in ABS or ASA with the standard Voron settings. I printed mine with 4 walls, 5 top and bottom layers, 40% Gyroid infill
Required hardware:
You will need slightly longer bolts, I only had longer bolts hence why I used M3 nuts ontop. I am including the step file that you can make it a little thicker at the top if you want to make use of M3x35mm cal screws. To mount the endstop, you will require M2x10 self tapping screws.