1 / 1
Battery case for 12V 6Ah Eremit LiFePO4 battery with Powerpole connector — image 1

Battery case for 12V 6Ah Eremit LiFePO4 battery with Powerpole connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A battery case for portable 12V 6Ah batteries used for portable operation of ham radios.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
57
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

A battery case for protecting a 12V 6Ah LiFePO4 battery from Eremit, with a clip for a Anderson Powerpole connector on top. The Powerpole connector and that battery are quite common for portable operation of ham radios, and although there is an official case, it sometimes has quite some lead time, and designing an own one is even more fun (that's what 3D printers are made for, after all).

Prints in two parts, the body holding the battery and the lid with the connector clip. The clip works like the one by JonathanPerkin, where I got the clip and incorporated it into the lid. The closing brackets are planned for M3 screws or threaded rods, but a small cable tie works just as well (as seen in the picture).

Printed on a Prusa MK4S with PETG, 0.4mm standard nozzle, 0.2mm layer height and the default 15% infill.

Tags