Tesla Model 3 Frunk Leveler
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.52 – €1.86 net (excluding VAT)
For file: tm3flscrew_015mm_petg_mk3s_2h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.69 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 2.21 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is an insert to level the floor of the Tesla Model 3 frunk so it can be used for pizza/carry out without the…
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 74
- Makes
- 0
- Views
- 4,825
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is an insert to level the floor of the Tesla Model 3 frunk so it can be used for pizza/carry out without the toppings sliding to one side.
Print instructions
PETG or ABS recommended to better handle outdoor temperatures unless you live somewhere consistently cool.
I printed the four main section at 0.3mm for speed (layer lines will not be visible once installed in the vehicle) and the screws at 0.15mm.
You will want to chase the threaded holes with a metric 8-1.25 tap. The screws themselves work pretty well since they are printed on-end. If you add glue for strength, make sure to test fit the screws first.