Gridfinity tool bin for the Steinel Gluematic 3002 hot glue gun

Gridfinity bin for the Steinel Gluematic 3002 hot glue gun. Size is 5 x 5 units and 6 units high. Other Steinel hot glue guns might also fit, especially older ones and the 1011, but I haven't tested that.

You can check with the included PDF template. Print it at 100% (important!) and check if your glue gun fits.

I let much tolerance for the tool, about 3 mm everywhere since I don't like to fiddle with it when putting the tool in. The cable must be bent to fit the 5x5 grid size but I think that's bearable.

This is designed for a cable with Euro plug. I don't know if they make versions with other plugs. Please let me know if you need a version for a different plug. I will try to make one.

The overhang, which is used to secure the cable inside the bin, has a 30-degree angle. On my Core One, it prints perfectly with PETG. Please make sure your printer can print 30-degree overhangs, or use support structures before you waste filament. Alternatively, you can print the version without overhangs. However, in my experience, the cable holds much better with the overhangs.

The cutout accommodates the entire height of the tool. This allows additional gridfinity bins to be stacked on top.

The basic shape of the tool was made with Tracefinity: https://app.tracefinity.net.

My printing settings:

• 0.2 mm BALANCED Generic PETG (PLA will probably also work)

• 2 perimeters

• 4 solid layers top and bottom

• 10% rectilinear infill

Please see also my other Gridfinity tool bins, cases, and parts: https://www.printables.com/@trses/collections/3756947

If you find my designs useful, you might consider buying me a coffee. But of course, you don't have to - my designs are free and always will be.