Baseboard Cable Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric cable clip that slide into gaps between baseboards and floorboards.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
Parametric cable clip that slide into gaps between floorboards and baseboards. It should allow for a decently wide range of parametric variants, but it is not super robust and may lead to bad models if the values are not tuned correctly.
Other alternatives online were not parametric, and my floorboards were quite uneven in gaps. This gap also changes with weather, so potentially some may need to be swapped in the future for bigger ones. I also added some small features I didn't see in other versions online like a joint fillet for strength (probably not super necessary), and a fillet at the end of the insert (this makes insertion much easier).
Printing Tips:
Print on the side (see STLs as examples)
I don't think brims are necessary, but I added 2mm ones just to avoid failure, it doesn't add much filament.
I will include an 8mm diameter one with two insert thicknesses. For me these were enough:
FloorboardClip_D8_W0_5.stl - 8.0 mm diameter, 0.5 mm insert thickness
FloorboardClip_D8_W1_0.stl - 8.0 mm diameter, 1.0 mm insert thickness
AI Note: I used gemini to help me with the initial openscad file (mostly to get me started with functions), but pretty much rewrote 90% of it by hand.