1 / 2
N0SA RLPv2/v3 Attachments for the UV-K1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
N0SA RLPv2/v3 attachments for the UV-K1 in two variations.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These were designed for the RLPv2/v3, the RLPv1 was 2mm wider and parts may need to be re-scaled wider very slightly.
Printed vertically with tree supports - this is important for the clips to retain strength. It will take some force to fit, but once locked in, there should be no play.
There are two variations:
Clip - Slides onto the stock belt clip, provides some room for wrapping extra cable or counter-poise
Plate - Screws directly onto the body, replacing the belt clip