Viola Earring — 4-Color AMS Pansy Blossom, Print-in-One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Viola (pansy) blossom charm, 28 mm, hanging from a ring above the upper petals.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
A viola, the little pansy with two lighter petals at the back, three darker ones in front, a yellow eye and dark whiskers running out from the throat, shrunk to an earring charm. The hanging ring sits above the two upper petals, so the flower hangs face out with the lip down. Four colours, printed in ONE job on an AMS or MMU machine: no glue, no paint, no assembly beyond a jump ring.
27.8 mm tall including the ring, 21.6 mm wide, 5.0 mm deep. Flat back, face up on the bed, no supports. About 1.2 g of PLA per earring, 2.4 g per pair, before purge.
The front petals sit proud of the ones behind so the layering shows in the print. Every petal rim is ruffled, the eye is a raised yellow dome with a stigma bead, and eleven whiskers fan over the side and lower petals.
Ring opening Ø2.6 mm, 1.7 mm rim, 2.4 mm thick, for a 0.8 mm jump ring
1.50 mm minimum wall on the exterior, no overhangs, 382 mm² on the bed
All four colour solids are one connected shell each, watertight, and their union is the complete blossom. The hidden whisker web sits 0.85 mm under the skin
How to print the colours
Import ONLY viola_earring_4c.stl, right-click, Split to Parts. You get EXACTLY 4 parts. Assign MAGENTA to the two upper petals and ring, VIOLET to the side petals and lower lip, YELLOW to the eye, DARK PURPLE or BLACK to the whiskers. Keep all four parts in ONE object. Do not use Split to Objects. Flat back on the bed, face up. Duplicate the whole object once for a pair.
The single-colour STLs are the same earring split into its colour volumes, offered as an alternative import route. They are not meant to be printed separately and glued.
Print settings
0.4 mm nozzle, 0.16 mm layers, 3 walls, 15 % infill, supports OFF, prime tower ON, same PLA type in all four slots. All four colours span the whole 5 mm height, so purge outweighs the charm itself. Print a pair, or a whole plate of earrings, in one job.
Hardware
Per pair: 2 earring hooks and 2 metal jump rings, about Ø6 mm outside with 0.7 to 0.8 mm wire. Open the jump rings sideways with pliers and thread each through the printed ring. Do not scale below 100 %.
