1 / 5
2020 extrusion flush flat panel twist in mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twist-in flush panel mount - allows 8 mm or other thickness panels to be mounted within 2020 aluminum extrusion frame
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Twist-in flush panel mount for 20x20 aluminum profile/extrusion. Prints without support.
Requires a M3 heat-set insert (max length is 7 mm). The panel must have a screw hole offset by 7mm.
I included a FreeCAD project where you can easily modify main parameters. There are 2 bodies:
- thin plates: maximal thickness is 6.39 mm
- thick plates: minimal thickness is 6.81 mm
