Airsoft Krytac Trident Mk3 stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesigned stock for airsoft Krytac Trident MK3.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Krytac Trident MK3 replacement stock. (May fit other styles with a 29mm stock tube)
I created this stock to replace the plain black stock. This stock has similar style and size as the original, but with Voronoi pattern.
I reused the butt cap pin, release lever spring, and release lever pin from the factory stock.
There are two styles, one that is plain, and the other with Voronoi pattern. the Voronoi pattern is offset by .01 from the surface to make painting easier without having it protrude from the surface.
Printed everything in PETG except the end cap shell. I printed that in TPU. you can print the cap and shell as one piece if you intend to print both in PETG.
Printed with a Flashforge Creator 5.
.20 layer height.
Painted Fuzzy Skin
4 walls
30% infill
5 top and bottom layers
I used supports with a PLA interface
Painted supports for the stock
Auto tree supports for the stock release and end cap shell (only if printing in TPU) otherwise I printed the shell solid side down.
For the stock, I added a modifier to increase infill in this thinner area because of the release pin holes.
110mm - 130mm at 80% infill
I have a matching muzzle brake as well. (included with the attached 3mf file)