Gravity hack
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.14 – €0.17 net (excluding VAT)
For file: Gravity_hack_01_suport_house.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
[en]Is the 3 hexagon bar stay balanced? [fr]Est-ce que la bare de 3 hexagones vas tenir en équilibre?
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 6
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution
English
Will this bar made of 3 hexagons stay balanced or fall over?
Both answers are correct, though one seems less logical!
Printing
For ease of use, use the 3mf file.
My printer has a 0.6 mm nozzle.
If you want to understand everything:
You need to glue
hexagon_1andhexagon_2together.hexagon_1: 100% infillhexagon_2: 0% infill and 2-layer walls (a slight adjustment may be necessary depending on your printer and slicing settings)
There are different support options, but the half-hexagon support_house seems best to me. It better accommodates the difference in weight between hexagon_1 and hexagon_2.
Français
Est ce que cette bare de 3 hexagones vas tenir en équilibre ou tomber ?
Les deux réponse sont bonne, pourtant l'une parait moins logique !
Impression
Pour plus de facilité utiliser le fichier 3mf.
Mon imprimante à une buse de 0.6 mm.
Si vous préférez tout comprendre:
il faut coller
hexagon_1ethexagon_2hexagon_1: remplissage 100%hexagon_2: remplissage 0% et parois en 2 couches (un petit ajustement peut être nécessaire suivant votre imprimante et vos paramètre de tranchage)
Il y a différent support, mais le demi hexagone support_house me semble le mieux. Il pardonne plus la différence de poids entre hexagon_1 et hexagon_2.