BTWIN light GoPro mount / Soporte GoPro para luz BTWIN (NEW w/ offset V2!!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
[EN] It's a mount for a BTWIN light. It's supposed to go mounted on the handlebar, but on a road bike it's difficult…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[EN] It's a mount for a BTWIN light. It's supposed to go mounted on the handlebar, but on a road bike it's difficult sometimes, so i made a mount that can be attached to any GoPro hook, for example under the GPS mount of the bike ( the red attachment of the photos can be bought for 4-5$ on Aliexpress). The light is 45mm wide.
Here you have the Fusion360 files:
- With offset (V2!)
- Without offset
The project is a WIP because the version with the offset has not been tested yet. I did the simple version (without offset) 2 months ago and it has survived since then, but looked quite ugly, so i have done the second version with offset which is, in my opinion, much more stealthy.
[ES] Es un soporte para una luz BTWIN del Decathlon. Se supone que debe ir montado en el manillar, pero en una bicicleta de carretera a veces es difícil ponerlas, así que hice un soporte que se puede unir a cualquier gancho GoPro, por ejemplo, debajo del soporte GPS de la bicicleta (el accesorio rojo de las fotos puede ser comprado por ~4€ en Aliexpress). La luz es de 45mm de ancho.
Aquí tienes los archivos de Fusion360:
El proyecto es un trabajo en proceso porque la versión con el retroceso aún no se ha probado. Hice la versión simple (sin retroceso) hace 2 meses y ha sobrevivido desde entonces, pero tenía un aspecto bastante feo, así que hice la segunda versión con retroceso que, en mi opinión, es mucho más disimulada.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Filament: HatchBox PLA Grey/Silver
Notes:
- Rafts are not totally necessary, but I had problems with the supports. Using a Brim is recommended Using low resolution is not necessary but the details are better, i have printed mine with 0.2mm and it's great. 50% infill is recommended. 4 outer layers are recommended. In CURA the "Layer view" should look like this (the one bellow is the version with offset, but it's the same for both versions):
Category: Sport & Outdoors