1 / 4
Nudibranch Earring — 4-Color AMS Sea Slug, Print-in-One — image 1
1 / 4

Nudibranch Earring — 4-Color AMS Sea Slug, Print-in-One

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Blue-and-orange aeolid sea slug charm, 36 mm, hanging head-up from a ring on its head.

Rating
5 / 5
Likes
1
Downloads
2
Makes
1
Views
37
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

An aeolid nudibranch — the blue sea slug with orange-tipped cerata and brown ringed rhinophores — shrunk to an earring charm. The hanging ring is fused to its HEAD, so it hangs head up with the tail pointing down. Four colours, printed in ONE job on an AMS or MMU machine: no glue, no paint, no assembly beyond a jump ring.

36.3 mm tall including the ring, 20.2 mm wide, 4.6 mm deep. Flat back, face up on the bed, no supports. About 1.6 g of PLA per earring, 3.2 g per pair, before purge.

The body is a smooth translucent-white slug; 16 blue cerata fan out from a ridge along each flank and meet at the tail; every ceras carries an orange tip; two brown rhinophores and two pale oral tentacles frame the ring.

  • Ring opening Ø2.6 mm, 1.7 mm rim, 2.4 mm thick — for a 0.8 mm jump ring

  • 1.17 mm minimum sampled wall on the exterior, no overhangs, 480 mm² on the bed

  • All four colour solids are one connected shell each, watertight, and their union is the complete slug; hidden connections sit at least 0.8 mm under the skin

How To Print The Colours

Import ONLY nudibranch_earring_4c.stl, right-click, Split to Parts. You get EXACTLY 4 parts. Assign WHITE to the body, tentacles and ring; BLUE to the cerata; ORANGE to the cerata tips; BROWN to the two rhinophores on the head. Keep all four parts in ONE object — do not use Split to Objects. Flat back on the bed, face up. Duplicate the whole object once for a pair.

The single-colour STLs are the same earring split into its colour volumes, offered as an alternative import route. They are not meant to be printed separately and glued.

Print settings that work: 0.4 mm nozzle, 0.16 mm layers, 3 walls, 15 % infill, supports OFF, prime tower ON, same PLA type in all four slots. All four colours span the whole 4.6 mm height, so purge outweighs the charm itself: print a pair, or a whole plate of earrings, in one job.

One Tip From The Test Print

give the BLUE 100 % infill, or at least 5 top layers. The web between the cerata is only about 1.5 mm thick, so at the default 15 % the top skin does not close and the blue comes out porous and translucent. It is 0.4 g of filament — you will not notice the time.

Hardware per pair: 2 earring hooks and 2 metal jump rings, ~Ø6 mm outside with 0.7–0.8 mm wire. Open the jump rings sideways with pliers and thread each through the printed ring. Do not scale below 100 %.

Printed and photographed 2026-09-17 in white, blue, orange and grey PLA (grey in place of brown for the rhinophores — it reads better against the white). The bail, the oral tentacles and all 32 orange tips came through at size.

Tags