Creality Chamber Heater Control Mount for Elegoo Centauri Carbon 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model can be used to attach the Creality heater controller to the CC2. The original spindle can be used.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 14
- Makes
- 1
- Views
- 273
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This model can be used to attach the Creality heater controller to the CC2. The original spindle can be attached to the extension; I made it wide enough so most filaments fit.
You can reuse the M3 screws from Spindle 2. I printed it in ABS because of the high temperature the side panel can reach when the chamber heater is on. To reduce the temperature of the side panel, see my spacer: Creality Chamber Heater Spacer for Elegoo Centauri Carbon 2.
You need to enable supports and use the normal type, not the tree type. I suggest printing the model using the orientation shown in the picture below:
