Thrustmaster TFRP T.Flight Rudder floor mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
uchycení leteckých pedálů / flightsim pedals mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Open Community License v1.1 + General Attribution v1
CZE.i----------------------------
Úchyt pedálů určený pro přilepení oboustrannou páskou na hladkou podlahu. Má co nejnižší profil se zaoblenýma hranama, abych si o něj neukopnul prst, když zrovna nelítám.
Použil jsem Prusament PETG Ultramarine Blue + Neon Green, profil 0,25mm STRUCTURAL a trysku 0,40.
Tiskněte na hladký plát, jinak páska nebude držet.
ENG.ai---------------------------
This mount is designed to be secured to a smooth floor using double-sided tape. To ensure maximum adhesion, print this on a smooth sheet; a textured surface will not provide enough contact area for the tape to bond effectively.
The design features an ultra-low profile with rounded edges to prevent any stubbed toes while walking around when you aren't in the cockpit.
Print Settings
I used a dual-color setup to make it pop, but the structural integrity comes from the PETG settings.
Material: Prusament PETG (Ultramarine Blue + Neon Green)
Layer Height: 0.25mm STRUCTURAL
Nozzle: 0.40mm
Print Surface: Satin sheet (crucial for tape adhesion)
Installation Tip
Before applying the double-sided tape, make sure to degrease both the bottom of the print and the floor surface (using isopropyl alcohol) for the strongest possible hold.