1 / 6
Replacement for Honda CT70 / ST70 Dax Fuel Tank Rubber Packing – 17512-098-000 (K0 Plastic Tank) — image 1
1 / 6

Replacement for Honda CT70 / ST70 Dax Fuel Tank Rubber Packing – 17512-098-000 (K0 Plastic Tank)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Honda CT70 / ST70 Dax Fuel Tank Rubber Packing – Honda part number 17512-098-000 (K0 Plastic Tank) + Adapter

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
33
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Replacement for Honda CT70 / ST70 Dax Fuel Tank Rubber Packing – 17512-098-000 (K0 Plastic Tank) + Adapter

A precise reproduction of Honda part number 17512-098-000 — the rubber packing for the fuel filler neck / fuel tank support on the early 1969–1970 Honda ST70 (Dax) and CT70 (Trail 70) K0 models fitted with the plastic fuel tank.

The original Honda part is long discontinued and genuine OEM examples are very difficult to source — and when they do turn up, they're usually old, hard and perished. This model is taken from the exact original part so you can print a fresh, soft replacement in flexible filament.

Two parts are included:

  1. Exact reproduction of the original 17512-098-000 packing.

  2. Adapter version — allows the older plastic tank to be fitted to the later (newer) tank support plate, which is otherwise a mismatch.

Original design, modelled from the genuine part.


✅ Features

  • Accurate reproduction of Honda 17512-098-000 fuel filler neck / fuel tank support rubber packing

  • Replaces a discontinued, hard-to-source OEM part

  • Bonus adapter part to fit the early plastic tank to the later tank support plate

  • Printed in TPU for a genuinely soft, compliant, rubber-like fit

  • Original design


🖨 Recommended Print Settings

Setting

Value

Material

TPU — 95A or softer (softer is better)

Layer Height

0.15 mm

Nozzle

0.4 mm

Perimeters/Walls

3

Infill

20% gyroid

Supports

Organic supports — upper lip only

⚠ Material matters on this one. Use TPU no harder than 95A — softer shore hardness (for example 85A–93A) gives a better result, because the part needs to behave like the original rubber packing and cushion the tank. Harder filaments will not compress or seat properly.

💡 Apart from the filament choice, the settings above are not critical — layer height, perimeters and infill can be adjusted to suit your printer and profile. Slow TPU down if your extruder needs it, and keep retraction low to avoid stringing.


🔧 Installation

  1. Print in TPU (95A or softer) with organic supports on the upper lip only.

  2. Remove the supports carefully

  3. Choose your part:

    • Exact reproduction — for an original-specification rebuild using the matching early tank support.

    • Adapter version — if you are fitting the early plastic tank to a later OEM tank support plate.

  4. Fit the packing to the fuel filler neck / tank support area as per the original part.

  5. Refit the tank and check it sits without rocking or pinching before tightening anything down.


🏍 Compatibility

  • Honda ST70 (Dax) — 1969–1970, K0, plastic fuel tank

  • Honda CT70 (Trail 70) — 1969–1970, K0, plastic fuel tank

  • Honda part number 17512-098-000 (rubber packing, fuel filler neck / fuel tank support)

  • Adapter version: early plastic tank → later tank support plate

May fit the following models (unconfirmed):

  • ST50 DAX ENGLAND

  • CT70 TRAIL 70 K0 1969 USA

  • CT70H TRAIL 70H 1970 CT70HK0 USA

  • CT70H TRAIL 70H 1972 CT70HK1

  • ST50K1 JAPAN

  • ST70K1 JAPAN

  • ST50 DAX BELGIUM

  • ST50 DAX EUROPEAN DIRECT SALES

  • ST50 DAX GERMANY

  • ST70 DAX GENERAL EXPORT TYPE 1

  • ST70 DAX GENERAL EXPORT TYPE 2

  • ST70 DAX ENGLAND

  • ST70 DAX FRANCE

  • ST70 DAX GERMANY

  • ST70 DAX GERMANY TYPE 2

  • ST70 DAX AUSTRALIA

  • ST70K3 DAX GERMANY

💡 If your bike has a steel tank, check your part number before printing.


Getting an early Dax or Trail 70 back on the road? Post a make — these little bikes deserve the right parts.


Tags