"Subtraction" Block (With Perimeter Standoffs) for Use in the Design of 60% Keyboard Cases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a "subtraction" block used in the design of standard 60% tray mount keyboard cases. It is used to subtract a…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a "subtraction" block used in the design of standard 60% tray mount keyboard cases. It is used to subtract a tray cavity/well from your case design. The accompanying standoffs will sit at the bottom of the tray, and will support the PCB.
In your design process, I would recommend treating the block and the standoffs as two separate groups. That is, I would subtract the block from your case design first, and then lower the standoffs as a group into the well.
This is an alternate version of the subtraction block that I posted here: https://www.thingiverse.com/thing:4889211
This version has perimeter standoffs, whereas the other version does not.
Note that, for simplicity, this model does not include a "subtraction" model for the USB port.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PolyMaker PETG
Category: Electronics