Breadboard Wire Straightening System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use to return breadboard wires to a fully straightened state before reuse
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 6
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tools for straightening solid-core breadboard wire up to 1.65 mm in diameter.
Theory Of Design
Two hollow tubes allowing for a breadboard wire to be passed through
Each has a slight bend in the middle, applying straightening force to the wire
One is "weak" for course straigthening
The other is "strong" for fine straigtening
Included
Models for wire diameters up to 1.45 mm (labeled "2.0")
Models for wire diameters up to 1.65 mm (labeled "2.5")
How To Use
Begin by pushing the breadboard wire through the "weak" tube (labeled "1")
You may have to manually bend the wire some yourself to get it to go in
It helps to rotate the tool to make entry easier
Take care not to puncture your fingers with the metal ends
Run the wire back and forth through the tube until it goes through easily
Rotating the tool will apply more straightening force
Switch to the "strong" tube (labeled "2") and follow the same steps
Samples printed with Silk PLA at 0.16mm "Optimal" resolution on a QIDI Plus4 printer
Source: https://www.tinkercad.com/things/aajJQzX5iXa-wire-straightener-final