1 / 1
TC-Helicon GoXLR Mini Desk Stand - 15 degree tilt, no supports — image 1

TC-Helicon GoXLR Mini Desk Stand - 15 degree tilt, no supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Angled desk stand for the TC-Helicon GoXLR Mini. Built to the published 168 x 132 x 70 mm. No supports needed.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial

An angled desk stand for the TC-Helicon GoXLR Mini. It lifts the mixer to about 15 degrees so the faders and knobs face you rather than the ceiling, and catches it on a front lip. No screws, nothing to install.

WHAT IT IS BUILT TO

TC-Helicon's published GoXLR Mini dimensions: 168 x 132 x 70 mm. The stand is 173 x 135 x 36 mm overall with 1.5 mm of clearance, so the unit sits in rather than being forced. Measure your own before printing - the numbers are here for exactly that.

PRINTING

No supports, prints flat on the base. PETG at 0.2 mm, 3 perimeters, 15% infill comes out around 62 g. The side rails are narrow deliberately: a GoXLR Mini is about 800 g and this holds it at rest, with the cross tie stopping the rails splaying under it.

HONEST NOTES

The geometry is parametric - generated from the device's outer box by a script rather than sculpted. That is why the fit is predictable and why every dimension can be stated, and it also means this is a simple shape rather than a designed object.

I also sell these printed and posted at datum.parts for people without a printer. If you have one, print it - that is what this file is for.

Tags