Exhaust vent to 2" hose for eufyMake E1 UV Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The smells can go right outside
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 1
- Views
- 69
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Unconfirmed problem/warning: If you have this connected to a fan or outdoor vent, DO NOT leave the hose connected to the printer while in idle/maintenance/moisturizing states, I have a concern this may cause the print head to become un-moisturized prematurely, leading to clogging, or I'm just unlucky.
The eufyMake E1 UV Printer can leave a funny smell in the room, but now that can be pushed directly outside
Remove the filter, press fit this into the space where the filter was, attach a hose with some kind of inline fan, and never worry about it again
Requires supports, some of the inner ones can be pushed out with a nail or a wooden dowel, then shaken out. Internal ribs prevent having the fill the entire cavity with supports. Designed to keep the equivalent of 2" duct airflow throughout the part while being as slim as possible to the front of the printer.