Filametrix M5 Slider Mod - MMU/ERCF Filament Cutter Voron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses an M5 Slider on the top and bottom of the cutter. A PTFE tube is screwed on, then cleaned up with a 2mm drill.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
A STEP assembly has been made of the Filametrix system.
This aims is easier assembly and less friction.
1 - thread on an M5 nut onto a PTFE tube.
2 - cut it off clean
3 - with a 2mm drill, just turning it by hand open up the squished tube back up to 2mm.
4 - cut a clean chamfer around the opening with a chamfer tool or a modeling knife.
5- back off the nut ever so slightly so the filament cutter does not snag on the tube.
Notes:
The Bambu hot end was modified so you can use 6mm long insert as well as the common 4mm. One ear was taken off so the bolts clamp right onto the hot end as it was designed. The original design, loosens up after a few days of printing in my experience.