N scale three story house with stoop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Example of how to make custom houses from the component collection titled "N scale modular town houses"
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License
This building serves as an example of how to construct custom houses using the component collection published under the title "N scale modular townhouses".
Dimensions:
Width: 43 mm (1.7 in)
Depth: 27 mm (1.06 in)
Height: 95 mm (3.74 in)
Printing and Assembly Instructions:
This model is provided as a complete kit for the specific building shown in the photos. The kit includes 5 STL files.
The file „Three story house with stoop single color kit.stl” contains all the parts required to assemble the building in a single print. The remaining 4 STL files contain the same parts separated by color (e.g., walls, roof, window frames, and stucco details, as indicated by their filenames). Import your preferred files into your slicer. If you use the color-separated files, place them on separate build plates.
You can print the kit as-is, or swap out components on the build plates using additional parts from the "N scale modular townhouses" library. Note that this package includes windows and stucco trim for the side walls. If you plan to connect multiple buildings into a row, some of these side elements will not be needed.
Recommended Print Settings:
Quality -> Wall Generator: Arachne (essential for printing thin lines and fine details)
Others -> Brim Type: Outer brim | Brim Width: 3 mm | Brim-Object Gap: 0.15 mm
Once all parts are printed, you can paint them before final assembly if desired.
Suggested Assembly Steps:
a. Insert the windows and doors. They should fit snugly into place, though minor fitting/cleanup of the openings may occasionally be required. The window frames project slightly beyond the wall surface to help position the surrounding stucco trim.
b. Glue the stucco trim in place. Pay close attention to the orientation of the wall blocks: the wall section above the window cutout is taller than the section below it, so ensure top and bottom are not reversed.
c. Glue the railings onto the stoop. The stair railings should rest flush on the steps, aligned with the side of the door and positioned inside the door trim.
d. Glue the parapet wall onto the roof.
e. The kit includes 4 alignment keys (inserts). Glue an insert into the top of a lower story so that approximately half of it protrudes upward to register the floor above without requiring immediate gluing. For example, insert the first key into the stoop base with ~50% protruding; this aligns the first story. These inserts can also serve as floor plates if you choose to build interior details.
f. Because the roof does not have a deep socket, glue its alignment key directly into the underside of the roof, leaving the top of the third story flush without a protruding key.
