1 / 1
Jio AirFiber AX3000  Active Cooling Stand | 120mm Fan Modular Dock — image 1

Jio AirFiber AX3000 Active Cooling Stand | 120mm Fan Modular Dock

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keep your Jio AirFiber AX3000 router cool and prevent thermal throttling!

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

# 🚀 Jio AirFiber AX3000 (Model JIDU6601) Active Cooling Stand (120mm Fan)

The Jio AirFiber Wi-Fi 6 AX3000 Router (Model: JIDU6601) delivers fast wireless speeds, but under heavy streaming, gaming, or high ambient temperatures, it can get notoriously hot. High internal temperatures lead to thermal throttling, bufferbloat latency spikes, dropped connections, and reduced hardware lifespan.

This custom-designed 2-piece active cooling pedestal houses a standard 120 mm × 120 mm × 25 mm PC fan, directing high-volume airflow straight up through the router's base intake vents while cleanly routing cables and elevating the router on your desk.

---

## ✨ Key Features

* 🧩 2-Stage Interlocking Assembly:

* Stage 1 (Fan Base): Sits flush on the desk with an integrated chamber for any standard 12025 fan, reinforced screw bosses, desk-level cable exit, and lower intake slots.

* Stage 2 (Router Cradle): Smoothly tapers inward to securely cup the base of the router with a heavy-duty mesh deck.

* Snap-Fit Alignment Funnel: A 3.8mm wide groove with a 45° lead-in mouth makes docking Stage 2 onto Stage 1 effortless and tool-free with zero binding.

* 🔌 Zero Rear Cable Obstruction (Open-Top U-Channel):

The rear opening is a *162 mm wide open U-cutout** extending all the way through the top rim.

* NO horizontal top bar! You have 100% unhindered access to plug and unplug RJ45 Ethernet jacks (even with stiff snag-free latch boots), the DC power barrel, and delicate fiber optic cables.

You can insert or remove the router at any time *without unplugging any cables**.

* 🌀 Universal 120mm PC Fan Compatibility:

Fits any standard *120 × 120 × 25 mm fan** (Noctua, Arctic P12, Corsair, BeQuiet, or budget 5V USB fans).

Industry-standard *105 mm × 105 mm** hole spacing.

* Solid 10mm OD reinforced corner bosses with 4.0mm pilot holes for standard PC fan self-tapping screws or M4 bolts.

* 11.5 mm expansion plenum above the fan blade prevents blade whine and turbulence.

* 🛡 Rock-Solid Corner Pillars + Dust Filter Slots:

* All four rounded corners are 100% solid structural pillars that transfer the router's 1.4 kg weight directly to your desk.

* The flat side walls feature 2.5 mm thick ribs with 1.5 mm fine filter slots to block large dust particles and pet hair.

* Central 116mm circular intake opening in the base relieves bed thermal stress and allows optional bottom airflow.

* 🖨 100% Support-Free 3D Printing:

* Every overhang, draft angle, and slot is modeled with self-supporting geometry (≤ 45°). No support material required!

---

## 🛠 Hardware & Bill of Materials (BOM)

1. 120mm Fan (12025 Form Factor):

* Option A (5V USB Fan): Noctua NF-A12x25 5V USB, AC Infinity 120mm USB fan, or generic 5V USB fan. Plugs directly into a phone charger or a USB port on a power strip.

* Option B (12V PC Fan): Any standard 12V fan (like Arctic P12) paired with a cheap 5V-to-12V USB step-up cable.

2. 4x Fan Screws:

* Standard coarse-thread PC fan self-tapping screws (nominal 5 mm × 10–12 mm) or M4 × 30 mm machine screws.

3. Optional:

* 4x small silicone/rubber adhesive bumpon pads for the bottom of the base.

---

## 🖨 Recommended Print Settings

| Setting | Recommended Value | Notes |

| :--- | :--- | :--- |

| Printer Type | FDM | Compatible with Ender 3, Bambu Lab, Prusa MK3/MK4, K1, etc. |

| Material | PLA or PETG | PETG is great for high heat; PLA works great too. |

| Layer Height | 0.20 mm | Optimized for 0.2mm layer increments. |

| Supports | NONE (Off) | 100% self-supporting geometry! |

| Wall Line Count | 4 – 5 walls (1.6 – 2.0 mm) | Gives high rigidity without excessive infill. |

| Infill | 15% – 20% | Gyroid or Grid recommended. |

| Cooling Fan Delay | Regular Fan Speed at Height: 1.5 mm | Delay part cooling to Layer 8 on Stage 1 to guarantee perfect base layer adhesion. |

| Initial Layer Temp | 215°C (Nozzle) / 60°C (Bed) | Standard PLA temps. |

---

## 🔧 Assembly Instructions

1. Install the Fan in Stage 1:

Drop your 120mm fan into the Stage 1 base with the fan's exhaust blowing *UPWARD** towards the router.

* Route the fan wire out through the rear arch slot at desk level.

* Fasten the fan using 4 fan screws driven straight down into the corner bosses.

2. Dock Stage 2:

* Align the Stage 2 cradle over Stage 1 (ensure the open rear U-cutout aligns with the rear cable exit of Stage 1).

* Slide Stage 2 down until it seats flush into the Stage 1 mating tongue.

3. Place Router & Plug In:

* Lower your Jio AirFiber router into the cradle pocket.

* Plug in your Ethernet cables, DC power adapter, and fiber cable through the unobstructed rear opening.

* Power on your fan and enjoy cool, uninterrupted, high-speed Wi-Fi!

---

## 📐 Dimensions

* Total Footprint on Desk: 209.0 mm (W) × 136.0 mm (D)

* Total Height on Desk: 70.5 mm

* Router Pocket: 194.5 mm × 78.0 mm (+2 mm all-around clearance for the Jio router)

Tags